Cisco Catalyst 2960L-SM-48TS - Switch - L3 - Smart - 48 x 10/100/1000 + 4 x 10 Gigabit SFP+ - an Rack montierbar
Gerätetyp | Switch - 48 Anschlüsse - L3 - Smart - stapelbar |
Gehäusetyp | An Rack montierbar |
Untertyp | Gigabit Ethernet |
Ports | 48 x 10/100/1000 + 4 x 10 Gigabit SFP+ |
Leistung | Weiterleitung Bandbreite: 88 Gbps Schaltbandbreite: 176 Gbps Weiterleitungsrate: 77,38 Mpps |
Kapazität | Ausgehende Portwarteschlangen: bis zu 8 IPv4-Routen (statisch): 16 IPv6-Routen (statisch): 16 IPv6-Gruppen (Multicast): 1024 Aktive VLANs: 256 VLAN IDs: 4094 STP-Fälle: 64 SPAN-Sitzungen: 4 Maximale Übertragungseinheit (Bytes): 9198 Byte |
Jumbo-Rahmenunterstützung | 10.240 Byte |
Routing Protocol | RIP, IGMP, MLDv2, MLD |
Remoteverwaltungsprotokoll | RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI, NTP |
Authentifizierungsmethode | Kerberos, RADIUS, TACACS+, WebAuth |
Leistungsmerkmale | DHCP Support, Auto-Negotiation, IGMP Snooping, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, Unterstützung für Dynamic Trunking Protocol (DTP), Unterstützung für Port Aggregation Protocol (PAgP), Cisco EnergyWise-Technologie, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), ohne Lüfter, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, statisches Routing, Class of Service (CoS), DiffServ Code Point (DSCP)--Unterstützung, IP-Quellwächter, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Spanning-tree Root Guard (STRG), Authentication, Authorization and Accounting (AAA), Voice VLAN, Proxy ARP, Energieeffizientes Ethernet (EEE), Switched Port Analyzer (SPAN), Enhanced QoS, BPDU Guard, Rapid Reconfiguration of Spanning Tree (RSTP) |
Produktzertifizierungen | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az, Bluetooth 4.0, IEEE 802.1AX |
Prozessor | ARM7: 800 MHz |
RAM | 512 MB |
Flash-Speicher | 256 MB |
Statusanzeiger | Port Status, Anschluß-Duplexmodus, System, Link/Geschwindigkeit |
Min Betriebstemperatur | -5 °C |
Max. Betriebstemperatur | 45 °C |
Zulässige Luftfeuchtigkeit im Betrieb | 5 - 90% |
Min. Lagertemperatur | -25 °C |
Max. Lagertemperatur | 70 °C |
Zulässige Luftfeuchtigkeit bei Lagerung | 5 - 95% |
Schnittstellen | 48 x 1000Base-T RJ-45 PoE+ 4 x 10GBase-X SFP+ 1 x Konsole (USB) 1 x Konsole RJ-45 |
Erforderliche Netzspannung | Wechselstrom 120/230 V (50 - 60 Hz) |
Software inbegriffen | Cisco IOS LAN Lite, Cisco Prime Infrastructure, Cisco DNA Center |
Breite | 4.4 cm |
Tiefe | 24 cm |
Höhe | 44.5 cm |
Gewicht | 2.98 kg |
Enthaltene Kabel | 2 x Konsolenkabel - 1.83 cm |
MTBF | 1,370,769 Stunden |
Produktzertifizierungen | Plug and Play, CISPR 22 Klasse A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Klasse A, EN 61000-4-5, RoHS, UL 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 55022 Class A, FCC CFR47 Part 15 A, CNS 13438 Class A, CAN/CSA C22.2 No. 60950-1 Second Edition, EN 300 386, USGv6, AS/NZS CISPR22 Class A |
Service und Support | Begrenzte Garantie - Austausch - Lebensdauer - Reaktionszeit: am nächsten Arbeitstag Technischer Support - Consulting - 90 Tage |