Cisco Catalyst 9200 - Switch - L3 - managed - 24 x 10/100/1000 - an Rack montierbar
Gerätetyp | Switch - 24 Anschlüsse - L3 - managed - stapelbar |
Gehäusetyp | An Rack montierbar |
Untertyp | Gigabit Ethernet |
Ports | 24 x 10/100/1000 |
Leistung | Mehrfachbandbreite: 160 Gbps Schaltbandbreite: 128 Gbps Weiterleitungsrate: 190,4 Mpps |
Kapazität | Virtuelle Netzwerke: 4 IPv4-Einträge in Routingtabelle: 4000 IPv6-Einträge in Routingtabelle: 2000 Flexible NetFlow entries: 16000 Gepackte Puffergröße: 6 MB VLAN IDs: 4096 Switched virtual interfaces (SVIs): 1000 |
Größe der MAC-Adresstabelle | 32.000 Einträge |
Jumbo-Rahmenunterstützung | 9198 Byte |
Routing Protocol | OSPF, RIP, IS-IS, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, Policy-Based Routing (PBR), RIPng, MSTP |
Remoteverwaltungsprotokoll | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF |
Verschlüsselungsalgorithmus | 128-Bit AES |
Leistungsmerkmale | ARP-Unterstützung, Spanning Tree Protocol (STP)-Unterstützung, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE-Unterstützung, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), Cisco StackWise-160-Technologie, DiffServ Code Point (DSCP)--Unterstützung, MACsec-Unterstützung, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN-Unterstützung, Committed Information Rate (CIR) |
Produktzertifizierungen | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) |
RAM | 4 GB |
Flash-Speicher | 4 GB |
Zulässige Luftfeuchtigkeit im Betrieb | 5 - 90% (nicht kondensierend) |
Min. Lagertemperatur | -40 °C |
Max. Lagertemperatur | 70 °C |
Zulässige Luftfeuchtigkeit bei Lagerung | 5 - 90% (nicht kondensierend) |
Schnittstellen | 24 x 10/100/1000 Base-T RJ-45 1 x Netzwerk-Stapelvorrichtung 1 x Verwaltung (LAN) RJ-45 1 x Konsole RJ-45 |
Erweiterungssteckplätze | 1 (gesamt)/ 1 (frei) x Erweiterungssteckplatz |
Stromversorgungsgerät | Internes Netzteil - Hot-Plug |
Max. unterstützte Anzahl | 2 |
Redundante Stromversorgung | Optional |
Gestellte Leistung | 125 Watt |
Erforderliche Netzspannung | Wechselstrom 100-240 V (50 - 60 Hz) |
Breite | 44.5 cm |
Tiefe | 35 cm |
Höhe | 4.4 cm |
Gewicht | 5 kg |
MTBF | 587,800 Stunden |
Produktzertifizierungen | CISPR 22 Klasse A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Klasse A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Klasse A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35 |