NETGEAR M4200 Intelligent Edge Series GSM4210P - Switch - L3 - managed - 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ - Seite-zu-Seite-Luftstrom - an Rack montierbar - PoE+ (240 W)
Gerätetyp | Switch - 10 Anschlüsse - L3 - managed |
Untertyp | 10 Gigabit Ethernet |
Ports | 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ |
Power Over Ethernet (PoE) | PoE+ |
Gehäusetyp | Seite-zu-Seite-Luftstrom an Rack montierbar 1U |
PoE-Budget | 240 W |
Leistung | Switching-Kapazität: 90 Gbit/s Durchsatz: 66,9 Mpps |
Größe der MAC-Adresstabelle | 16.000 Einträge |
Routing Protocol | RIP, statisches IPv4-Routing, statisches IPv6-Routing, MLD |
Remoteverwaltungsprotokoll | SNMP, RMON, Telnet, HTTPS, SSH, CLI |
Authentifizierungsmethode | Secure Shell (SSH), RADIUS, TACACS+ |
Produktzertifizierungen | IEEE 802.3ad (LACP), IEEE 802.1AX |
Prozessor | : 800 MHz |
RAM | 1 GB |
Flash-Speicher | 256 MB |
Leistungsmerkmale | DHCP Support, VLAN-Unterstützung, IGMP Snooping, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, MLD-Snooping, 16-MB-Paketpuffer |
Schnittstellen | 1 x Verwaltung (Gigabit-LAN) 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 1 x seriell (Konsole) RJ-45 1 x Konsole (Mini-USB) 1 x USB 6 x 1/2.5G (PoE+) RJ-45 2 x 1/2.5G/5G (PoE+) RJ-45 2 x 10GBase-X SFP+ 1 x USB Type A |
Stromversorgungsgerät | Internes Netzteil |
Erforderliche Netzspannung | Wechselstrom 120/230 V |
Leistungsaufnahme im Betrieb | 286.1 Watt |
Software inbegriffen | Treiber & Dienstprogramme |
Rackmontagesatz | Mitgeliefert |
Lokalisierung | Europa, Americas |
Service & Support | Lebenslange NETGEAR-Garantie |