Cisco Catalyst 2960X-48LPD-L - Switch - managed - 48 x 10/100/1000 (PoE+) + 2 x SFP+ - Desktop, an Rack montierbar - PoE+ (370 W)
Gerätetyp | Switch - 48 Anschlüsse - managed - stapelbar |
Gehäusetyp | Desktop, an Rack montierbar 1U |
Untertyp | Gigabit Ethernet |
Ports | 48 x 10/100/1000 (PoE+) + 2 x SFP+ |
Power Over Ethernet (PoE) | PoE+ |
PoE-Budget | 370 W |
Leistung | Switching-Kapazität: 216 Gbps Weiterleitungsleistung (Paketgröße 64 Byte): 130.9 Mpps |
Kapazität | Aktive VLANs: 1023 |
Jumbo-Rahmenunterstützung | 9216 Byte |
Max. Einheiten pro Stack | 8 |
Remoteverwaltungsprotokoll | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, CLI |
Authentifizierungsmethode | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Leistungsmerkmale | Vollduplex-fähig, Auto-Negotiation, BOOTP-Unterstützung, ARP-Unterstützung, VLAN-Unterstützung, Auto-Uplink (Auto MDI/MDI-X), IGMP Snooping, Syslog-Unterstützung, DiffServ-Unterstützung, Broadcast Storm Control, IPv6-Unterstützung, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP)-Unterstützung, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, DHCP-Snooping, Unterstützung für Dynamic Trunking Protocol (DTP), Unterstützung für Port Aggregation Protocol (PAgP), Unterstützung für Trivial File Transfer Protocol (TFTP), Unterstützung für Access Control List (ACL), Quality of Service (QoS), MLD-Snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise-Technologie, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP-Support, DHCP-Relais, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP)-Unterstützung, Energy Efficient Ethernet, Management Information Base (MIB), Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS), Cisco FlexStack Plus, DiffServ Code Point (DSCP)--Unterstützung |
Produktzertifizierungen | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX |
Prozessor | : 600 MHz |
RAM | 512 MB |
Flash-Speicher | 128 MB |
Statusanzeiger | Anschluß-Übertragungsgeschwindigkeit, Anschluß-Duplexmodus, System, Status, RPS (redundantes Netzteil), PoE, Link/Aktivität |
Min Betriebstemperatur | -5 °C |
Max. Betriebstemperatur | 45 °C |
Zulässige Luftfeuchtigkeit im Betrieb | 10 - 95% (nicht kondensierend) |
Min. Lagertemperatur | -25 °C |
Max. Lagertemperatur | 70 °C |
Zulässige Luftfeuchtigkeit bei Lagerung | 10 - 95% (nicht kondensierend) |
Schnittstellen | 48 x 1000Base-T RJ-45 12 Ports (PoE+)/24 Ports (PoE) 1 x Konsole RJ-45 1 x mini-USB Type B Management 1 x USB Type A 1 x 100Base-TX RJ-45 Management 2 x SFP+ Uplink |
Erweiterungssteckplätze | 1 (gesamt)/ 1 (frei) x Stapelmodul |
Stromversorgungsgerät | Internes Netzteil |
Redundante Stromversorgung | Optional |
Erforderliche Netzspannung | Wechselstrom 120/230 V (50/60 Hz) |
Leistungsaufnahme im Betrieb | 45.7 Watt |
Besonderheiten | Anschluss für Redundant Power System (RPS) |
Software inbegriffen | Cisco IOS LAN Base |
Breite | 44.5 cm |
Tiefe | 36.8 cm |
Höhe | 4.5 cm |
Gewicht | 5.8 kg |
MTBF | 277,960 Stunden |
Produktzertifizierungen | CISPR 22 Klasse A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Klasse A, AS/NZS 60950-1, ICES-003 Klasse A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, RoHS 2011/65/EU, EN 300386 |
Service & Support | Begrenzte Garantie - Vorabaustausch defekter Komponenten - Lebensdauer - Reaktionszeit: am nächsten Arbeitstag Technischer Support - Consulting - 90 Tage |